For the sake of convenience, we generally use a uniform representation of the various specifications of the rubber belt, various types of conveyor belt representation as follows: layered conveyor belt:

Canvas conveyor belt: CC-56 said, the conveyor belt width of 300-2400mm general production length of 250 meters;

Nylon conveyor belt: with NN (100-600), conveyor belt width 300-3000mm general production length within 700 meters; polyester conveyor belt: EP (100-600) said, the conveyor belt width 300-3000mm general production (6 + 3) that the conveyor belt up and down the cover of plastic were 6 mm and 3 mm, respectively, the length of 700 meters; the general layered conveyor belt representation method: EP300 1200 * 4 (6 +3), 4 said the number of layers, thick. Calculation formula: width * {layer + (6 +3) /1.5} = standard square meters;

Steel wire conveyor belt commonly used method: ST2000, 1000 * (8.0-8.0-6.0) as an example: ST2000 is the strength of the specifications, 2000N / mmH is the performance of the coverage of the glue level: 1000 that is the width of the product , The unit mm, 8.0 is the diameter of the wire rope, the unit mm, 8.0-6.0 that is the thickness of the upper and lower cover glue, the unit mm

The representation of the whole conveyor belt: general coal and PVC and PVG flame retardant conveyor belt with the strength level and conveyor belt to express the level. Strength level is generally divided into: 4, 5, 6, 7, 8, 9, 10, 11 and up to 16 conveyor belt, respectively, the corresponding strength of 680S, 800S, 1000S, 1250S, 1400S, 1600S, 1800S, 2000S, 2240S, 2500S, 2800S, 3100S and 3400S.

Rubber conveyor belt width is generally: 500mm, 650mm, 800mm, 1000mm, 1200mm, 1400mm, 1600mm, 1800mm and so on. All conveyor belts must be ring-shaped for practical use, so the conveyor belt connector is very critical. The quality of the joint directly affects the service life of the rubber conveyor belt and the smooth and smooth operation of the conveyor line. Tape rubber conveyor belt joints: according to the need to use mechanical joints, cold adhesive, heat curing joints and other joint methods. General cold bonding joints, hot vulcanization joints to take the ladder structure joints.

PVC and PVG whole core flame retardant conveyor belt connector: As the whole core structure is rather special, the connector is not easy, so most of the mechanical joint approach, that is, belt buckle joints. But more than 8 of the conveyor belt, in order to ensure the effect of joints, the general use of hot vulcanized joints method. The structure of the joint is a finger joint. PVC and PVG whole flame retardant conveyor belt heat curing process is more complex, the equipment requirements are relatively high.