Ceramic roller is a combination of ceramic body, bearing, shaft, plastic labyrinth sealsmember, Is a high temperature calcined from a porcelain on behalf of the steel, plastic applications on the new breakthrough, is a new roller replacement products, is the use of porcelain body, bearings, shaft, plastic labyrinth seal composition of the composition

1, corrosion-resistant: acid and alkali salts are not corrosive effect.

2, strong hardness: strong wear resistance.

3, fully sealed: both ends of the plastic labyrinth seals, oil will not leak oil, rolling shaft can be long-term operation in a fully sealed state.

4, ceramic surface, the formation of oxide film, it does not stick with any material, any material can not respond. The slot roller removes the belt. In the slope of the belt on the force, the resistance is small, the best results. Double section roller, can reduce the belt on the idler on the heavy pressure point, roller hollow device can make the belt stick to their own fall, do not stick suction roller, can extend the roller use period.

5, long service life, longer than the use of steel roller 2-3 times, and can reduce the belt wear, belt does not run to extend the belt life.

6, high economic efficiency, can reduce the overall cost of belt conveyor, reduce maintenance hours.

Pieces.

At present the main roller has two kinds of steel and porcelain:

Porcelain roller with no rust and corrosion resistance, etc., the surface smooth, wear rate of 0.1%, extending the life of the belt, porcelain no recovery value, reducing the phenomenon of roller stolen. Rare earth porcelain is made of porous ceramic raw materials mixed with rare earth raw materials refined, it has a strong ability to filter adsorption, high strength, low resistance, corrosion resistance, non-toxic, simple regeneration, long service life and so on.